Real-Time Winds Aloft
The TCEQ operates a network of three radar wind profilers. Wind measurements from these profilers are used to determine the transport of air pollution and to help validate model-generated wind fields used for air quality modeling.
- El Paso, Socorro Radar – Current Wind Plot
- Dallas-Fort Worth, Cleburne Airport Radar – Current Wind Plot not available.
- Beaumont, Jefferson County Airport Radar – Current Wind Plot not available.
- La Porte Radar – Current Wind Plot not available.
How It Works
The radar profilers transmit radio wave pulses into the atmosphere and then record the resulting backscattered radio waves to measure winds in the range from 137 meters (449 feet) to 3,601 meters (11,814 feet) above ground level.
Real-time wind data plots are generated every 30 minutes from the radar profilers and relayed to this Web site for display. The plots show the last 12 hours of wind profiles. The wind data are plotted in standard meteorological form, with a vector line indicating the wind direction and barbs indicating the wind speed. The barbs are plotted on the tail of the wind vector (the end where the wind is coming from). Each full barb indicates five meters per second of wind speed (about 10 knots or 12 miles per hour) and a half-barb indicates 2.5 meters per second (about five knots or six miles per hour). The wind plots are colorized for wind speed using the color scale shown on the right side of the plot.
National Oceanic and Atmospheric Administration (NOAA) Data
Data from the TCEQ radar profilers are available from NOAA's Multi-Agency Profiler Graphical Data Displays.