Skip to main content

Resley Creek C704

Find Site:       
  • State: Texas
  • County: Comanche
  • City: Dublin
  • Address: 1200 FM 2823
  • Site coordinates:
    • Latitude: 31° 55' 56.00" North (+31.932222°)
    • Longitude: 98° 16' 55.00" West (-98.281944°)
    • Elevation: 360 m (1181 ft)
  • Deactivated (Deactivated Jan 8, 2012)
Area Map Overall site view Street level Map
 Upstream  
Left Bank View not available
Right Bank
 Downstream  
CAMS Data
Historical Measurements
Monthly Summary Report
Yearly Summary Report
  • Real-time monitoring since: Friday, July 19, 2002
  • Current status: Deactivated Sunday, January 8, 2012
  • Parameters that have been monitored but are no longer active:
    • Meteorological parameters:
      • Precipitation
    • Water parameters:
      • Surface Water Temperature
      • Water Flow Rate
      • Water Velocity
      • Aqualab Nitrate Blank
      • Aqualab Ammonia Blank
      • Aqualab TRP Blank
      • Sample Depth
      • Water Level
      • Surface Specific Conductance
      • Water Ammonia
      • Water Nitrate
      • Dissolved Oxygen Charge
      • Chlorophyll
      • Turbidity
      • Water Total Reactive Phosphorus
      • Water Ammonia mg/L
      • Surface Dissolved Oxygen
      • Surface Water pH
      • Aqualab Cabinet Temperature

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.