Skip to content. | Skip to navigation

Personal tools


Arroyo Colorado at Rio Hondo C730

  • State: Texas
  • County: Cameron
  • City: Rio Hondo
  • Address: Arroyo Colorado at FM106 Bridge
  • Site coordinates:
    • Latitude: 26° 14' 6.00" North (+26.235000°)
    • Longitude: 97° 35' 4.92" West (-97.584700°)
    • Elevation: 6 m (20 ft)
  • Maintained by: TCEQ Harlingen Regional Office
Area Map Overall site
view not
Street level Map
 Upstream View not available 
Left Bank View not available
Right Bank View not available
 Downstream View not available 
Current Measurements
Monthly Summary Report
Yearly Summary Report
  • Real-time monitoring since: Thursday, June 15, 2006
  • Current status: Active
  • Continuous monitors located at this site:
    • Water Quality
  • Parameters currently being monitored:
    • Water parameters:
      • Surface Water Temperature
      • Sample Depth
      • Surface Specific Conductance
      • Surface Dissolved Oxygen
  • Parameters that have been monitored but are no longer active:
    • Meteorological parameters:
      • Wind Speed
      • Resultant Wind Speed
      • Resultant Wind Direction
      • Maximum Wind Gust
      • Standard Deviation of Horizontal Wind Direction
      • Outdoor Temperature
    • Water parameters:
      • Surface Water Temperature
      • Sample Depth
      • Water Level
      • Surface Specific Conductance
      • Dissolved Oxygen Charge
      • Surface Dissolved Oxygen
      • Surface Water pH

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data beginning 1/1/2013, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.