Skip to content. | Skip to navigation

Personal tools

Navigation

Data by Year by Site by Parameter

Use this form to retrieve yearly summaries of hourly average data collected at some TCEQ continuous air monitoring stations. Although this is our most current data, it is not considered official until it has been certified by our technical staff. This information is updated hourly.

This web page provides the most current hourly averaged data available. Our convention for time-tagging data is the beginning of each hour. For example, values shown for the noon hour are based on measurements taken from noon to 1:00 p.m. The noon average will not be calculated until after 1:00 p.m. The noon average will then be available on our external server from 1:15 p.m. to 1:30 p.m. This results in an apparent one-hour time lag in the data. We also present our data in Local Standard Time for each measuring site. For most of Texas this is Central Standard Time. During Daylight Savings, this introduces another apparent one-hour time lag in the data.

Select a monitoring site:

View yearly summaries of the hourly averages for all the pollutants and meteorological conditions measured by the TCEQ at your selected monitoring site. Select the monitoring site you are interested in from the list below. Please note that not all parameters are measured at all sites

This page will refresh when you select a different CAMS from this list.

Always select the CAMS you want before setting any options below (selecting a new CAMS forces this web page to refresh and reset to the previously stored options).

Please select a CAMS from the list above.

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data beginning 1/1/2013, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.