Air PBR 106.315: Sand or Investment Molds
Sand or investment molds with a capacity of 100 pounds or less used for the casting of metals are permitted by rule under Title 30, Texas Administrative Code (30 TAC), Section 106.315. To qualify for this permit by rule (PBR), your facility must also meet the general conditions stated in 30 TAC Section 106.4.
To find out whether your facility meets the general conditions stated in Section 106.4, Complete our PBR Applicability Checklist, TCEQ Form - 10149.
If your facility cannot comply with these conditions, see Types of New Source Review Authorizations for other options.
This PBR does not require you to register or pay a fee.
Under 30 TAC Section 106.8, your records must identify the rules under which your facility is operating and demonstrate compliance for a rolling 12-month period. Be sure you keep at least these records:
- a copy of Section 106.4
- a copy of Section 106.315
- records documenting compliance with the above rules
These records must be kept on site and readily available on request for inspection by the TCEQ or any air pollution control program that has jurisdiction. If you have questions about the type of records you should keep, contact the Air Program in the TCEQ regional office that serves your county.
Questions? We Can Help
If you have questions about this or any other PBR, contact us: