Skip to content. | Skip to navigation

Personal tools

Navigation

Questions or Comments:
airperm@tceq.texas.gov
You are here: Home / Permitting / Air Permits / PermitByRule / Subchapter Q

Air PBRs of Subchapter Q

Air permits by rule for equipment, facilities, or operations related to plastics and rubber.

Topics Under this Category

Air PBR 106.391: Rubber and Plastic Curing Presses
Presses used for the curing of rubber products and plastic products are permitted by rule under 30 TAC Section 106.391. No registration or record keeping is required.
Air PBR 106.392: Thermoset Resin Facilities
Facilities using thermoset resins to manufacture or repair products are permitted by rule. Links to relevant forms, guidance, and rules.
Air PBR 106.393: Conveyance and Storage of Plastic and Rubber Material
Facilities used for conveyance and storage of plastic and rubber material are permitted by rule if they meet the conditions stated in 30 TAC Sections 106.4 and 106.393. No registration or fee is required. Record-keeping requirements are discussed.
Air PBR 106.394: Plastic Compression and Injection Molding
Equipment used for compression molding and injection molding of plastics is permitted by rule under 30 TAC Section 106.394. No registration or record keeping is required.
Air PBR 106.395: Equipment for Mixing Plastic and Rubber (No Solvent)
Facilities used for equipment for mixing plastic and rubber without solvent are permitted by rule if they meet the conditions stated in 30 TAC Sections 106.4 and 106.395. No registration or fee is required. Record-keeping requirements are discussed.