NOTE: This is a prototype user interface we can use to make sure we're all solving the same problem. It does not contain a complete list of available Sondes, provides no mechanism to select the station (or a previously entered calibration), or support setting validation flags. It does not check the input to make sure it is reasonable and it does nothing when the Save... button is pressed.
It does let you experiment with using the form to enter the calibration data. You can press the Tab key to move from one field to the next. As you do, you will notice that the formula, difference and rating fields are filled in (it only knows you have finished editing a field when you leave it; either by pressing the tab key, or by clicking elsewhere on the page).
In the real application, you will have to select a station before you see this page. You will not have to enter calibration information for all parameters (DO, turbidity etc.), but if you enter any information for a parameter, you will have to enter all the information for that parameter. When you press the 'Save...' button, it will show you a summary of what you have entered and ask you to confirm this before it proceeds. Once you confirm, it will validate the data for the selected period (deploy date to retrieve date) and flag it with the rating.
This was tested with a screen resolution of 1024 x 768; your mileage may vary. Let me know if it looks really crowded (or lonely) on your display.
Please try it out and see if it does what you expect it to do.