# Multi-Can configuration file
#
# CAMS,poc,TAMS,type,start_date,stop_date,press_param,mfc_param,port_param,int_temp_POC,min_allow_start_press,max_allow_start_press,
#	min_allow_stop_press,max_allow_stop_press,ideal_flow,allow_flow_error
#
# Where:
#	CAMS = the datalogger ID that the data is collected from
#	poc = which pressure, mfc, and port to use
#	TAMS = yet another numbering scheme that the lab uses
#	type = the type of sampler "cs10" or "entech"
#	start_date = the date (in UTC) that the settings start YYYYMMDDhhmmss
#	stop_date = the date (in UTC) that the settings stop YYYYMMDDhhmmss (a value of 0 means still active)
#	press_param = which pressure parameter number to use
#	mfc_param = which MFC parameter number to use
#	port_param = which port parameter number to use
#	int_temp_POC = which internal temperature to use
#	min_allow_start_press = minimum allowable starting pressure for the canister
#	max_allow_start_press = maximum allowable starting pressure for the canister
#	min_allow_stop_press = minimum allowable stop pressure for the canister
#	max_allow_stop_press = maximum allowable stop pressure for the canister
#	ideal_press = the ideal stop pressure for the canister
#	allow_flow_error = allowable flow error (in percent/100)
#	schedule = when is canister scheduled to run (0 = National schedule; 1 = On Demand; 2 = Daily; 3 = Event)
#          event triggered runs do not have a pattern -- it's just a single can that starts whenever
#       start_press_warn = pressure values between this and max_allow_start_press will be flagged on web pages
#       stop_press_warn = pressure values between this and min_allow_stop_press will be flagged on web pages
#
# Optional (not yet implemented):
#	mfc_offset   = offset in minutes from can start and stop times that start and stop flow is grabbed
#	               MUST BE an even five-minute increment
#	               start flow = can start + mfc_offset (start flow should be grabbed after run starts)
#                      stop flow  = can stop - mfc_offset (stop flow should be grabbed before run stops)
#	press_offset = offset in minutes from can start and stop times that start and stop press is grabbed
#	               MUST BE an even five-minute increment
#	               start press = can start - press_offset (start press should be grabbed before run starts)
#                      stop press  = can stop + press_offset (stop press should be grabbed after run stops)
#
#
# NOTE: the current active definition for each unique CAMS number needs to be the last ordered entry
#
### Deleted all non-multican, event triggered or on demand samplers ###
### If there are problems w/ can tracker, revert back to saved file MULTICAN.DAT.123008 ###
#
## REG 1 ##
79,1,E079,entech,20030805130000,0,11001,11000,11002,1,-1,.8,7,11.9,11,.15,3,.5,10.5
104,1,E104,entech,20030805130000,20110101000000,11001,11000,11002,1,-1,.8,7,11.9,11,.15,3,.5,10.5
105,1,E105,entech,20030805130000,20110101000000,11001,11000,11002,1,-1,.8,7,11.9,11,.15,3,.5,10.5
105,2,E205,entech,20030805130000,20110101000000,11001,11000,11002,1,-1,.8,7,11.9,11,.15,3,.5,10.5
## REG 4 ##
56,1,X157,entech,20031013170000,20070601180000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
70,1,X182,entech,20031014180000,20070601180000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
71,1,X071,entech,20040407000000,20070601180000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
89,1,Z400,entech,20100701191500,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
94,1,X158,entech,20031014180000,20070601180000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
97,1,Z401,entech,20100714200500,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
## REG 5 ##
85,1,E303,entech,20040120193500,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
644,2,E644,entech,20050601000000,2008040200000,11001,11000,11002,2,-1,.8,7,13.7,12,.15,3,.5,10.5
668,1,E668,entech,20060802000000,2006121500000,11001,11000,11002,2,-1,.8,7,13.7,12,.15,3,.5,10.5
## REG 6 ##
12,1,X151,entech,20031209220000,20110101000000,11001,11000,11002,1,-1,.8,7,11.9,11,.15,1,.5,10.5
37,1,X159,entech,20031210160000,20110101000000,11001,11000,11002,1,-1,.8,7,11.9,11,.15,1,.5,10.5
## REG 10 ##
665,1,E665,entech,20060726000000,2006111400000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
## REG 12 ##
8,1,X150,entech,20030709140000,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
26,1,X154,entech,20030820124500,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
34,1,X152,entech,20030722100000,20070322000000,11001,11000,11002,3,-1,.8,7,13.7,12,.15,1,.5,10.5
#1029,2,E307,entech,20111201000000,20121031235500,11001,11000,11002,1,-1,.8,7,13.7,12,.15,1,.5,10.5
1029,2,E407,entech,20121101010000,0,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
1034,1,X183,entech,20070320130000,20110101000000,11001,11000,11002,3,-1,.8,7,13.7,12,.15,1,.5,10.5
#1049,2,E330,entech,20080630000000,20121031000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
1049,2,E430,entech,20121101000000,0,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
## REG 14 ##
98,1,E155,entech,20040525000000,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
168,2,E168,entech,20031118150000,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
170,1,E170,entech,20041014211500,20110101000000,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5
1024,1,E408,entech,20121101010000,0,11001,11000,11002,1,-1,.8,7,13.7,12,.15,3,.5,10.5