Skip to main content

Brownsville C80/AGP180
Find Site:       
  • EPA site number: 48-061-0006
  • State: Texas
  • County: Cameron
  • City: Brownsville
  • Address: 344 Porter Drive
  • Site coordinates:
    • Latitude: 25° 53' 33.06" North (+25.892518°)
    • Longitude: 97° 29' 37.79" West (-97.493830°)
    • Elevation: 6 m (20 ft)
  • Deactivated (Deactivated Apr 5, 2023)
    • There are other monitoring sites co-located with this one which are still active and collecting data.
Area Map Overall site view Street level Map
Northwest North Northeast
West
East
Southwest South Southeast
CAMS Data
Current Measurements
Monthly Summary Report
Yearly Summary Report
  • Real-time monitoring since: Tuesday, April 7, 1998
  • Current status: Deactivated Wednesday, April 5, 2023
    • There are other monitoring sites co-located with this one which are still active and collecting data.
  • Continuous monitors located at this site:
    • Met Data
  • Non-Continuous monitors located at this site:
    • Canister VOC
    • PAH/SVOC
    • TSP
  • Parameters currently being monitored:
    • Meteorological parameters:
      • Resultant Wind Speed
      • Resultant Wind Direction
      • Standard Deviation of Horizontal Wind Direction
  • Parameters that have been monitored but are no longer active:
    • Pollution parameters:
      • Carbon Monoxide
      • Sulfur Dioxide
      • Ozone
      • PM-10 (Standard Conditions)
      • PM-10 (Local Conditions)
      • PM-2.5 (Local Conditions)
      • PM-2.5 (Local Conditions) Acceptable
    • Meteorological parameters:
      • Wind Speed
      • Wind Direction
      • Maximum Wind Gust
      • Outdoor Temperature
      • Solar Radiation

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.