Skip to content. | Skip to navigation

Personal tools

Navigation


Scarborough Creek North Bosque C726

  • State: Texas
  • County: Erath
  • City: Stephenville
  • Address: County Road 423
  • Site coordinates:
    • Latitude: 32° 18' 13.00" North (+32.303611°)
    • Longitude: 98° 17' 17.00" West (-98.288056°)
    • Elevation: 427 m (1401 ft)
  • Maintained by: TCEQ DFW Regional Office
Area Map Overall site view Street level Map
 Upstream  
Left Bank View not available
Right Bank View not available
 Downstream  
CAMS Data
Current Measurements
Monthly Summary Report
Yearly Summary Report
  • Real-time monitoring since: Wednesday, May 16, 2007
  • Current status: Active
  • Continuous monitors located at this site:
    • Water Quality
  • Parameters currently being monitored:
    • Water parameters:
      • Surface Water Temperature
      • Sample Depth
      • Surface Specific Conductance
  • Parameters that have been monitored but are no longer active:
    • Water parameters:
      • Aqualab Nitrate Blank
      • Aqualab Ammonia Blank
      • Aqualab TRP Blank
      • Water Level
      • Surface Specific Conductance
      • Water Ammonia
      • Water Nitrate
      • Turbidity
      • Water Total Reactive Phosphorus
      • Surface Dissolved Oxygen
      • Surface Water pH
      • Aqualab Cabinet Temperature

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data beginning 1/1/2013, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.