Skip to content. | Skip to navigation

Personal tools

Navigation

Questions or Comments:
airperm@tceq.texas.gov
You are here: Home / Permitting / Air Permits / Air Navigation Folder / NSR Guidance Documents for Coating Sources

NSR Guidance Documents for Coating Sources

Guidance for obtaining permits for new facilities or modifications to existing facilities that will result in increased air emissions. For generators, boilers, heaters, and incinerators, aincluding incinerators used for soil remediation.

Coating Sources

This information is maintained by the Combustion/Coatings NSR Permits Section and is subject to change. These requirements represent NSR guidelines and are provided for informational purposes only. The requirements for any permit or amendment are subject to change through TCEQ case by case evaluation procedures [30 TAC 116.111(a)]. Please contact the Combustion/Coatings NSR Permits Section management if there are questions related to the guidelines. Please note that more current BACT guidance is located on the BACT Guidelines for Coatings Sources web page.

Additional information can be found on the Air NSR Permits: Index of Common Permitted Facilities page.

The following are permitting guidance documents and informational pamphlets related to filing air permit applications.

  • Abrasive Blast Cleaning - Draft
    • Under Review
  • Solvent Degreasing Operations - Draft
    • Under Review
  • Fiberglass Reinforced Plastics and Cultured Marble Plants - Draft
    • Under Review
  • Flexographic Printing - Draft
    • Under Review
  • Heatset Printing - Draft
    • Under Review
  • Non-Heatset Offset Printing Operations - Draft
    • Under Review
  • Paint Manufacturing - Draft
    • Under Review
  • Surface Coating Operations - Draft
    • Under Review

Questions? We Can Help

If you have questions contact us.