Skip to Content
Questions or Comments: airperm@tceq.texas.gov

Air PBR 106.394: Plastic Compression and Injection Molding

Equipment used for compression molding and injection molding of plastics is permitted by rule under 30 TAC Section 106.394. No registration or recordkeeping is required.

Note: The Office of the Secretary of State has moved their content to a new server. Please use this link to access Texas Administrative Code Title 30 until TCEQ is able to update the linked content.

Equipment used for compression molding and injection molding of plastics is permitted by rule under Title 30, Texas Administrative Code (30 TAC), Section 106.394 . To qualify for this permit by rule (PBR), your facility must also meet the general conditions stated in 30 TAC Section 106.4 .

This PBR does not require you to register, keep records, or pay a fee. However, at any time a TCEQ investigator could ask you to collect and present supporting information.

Questions? We Can Help

If you have questions about this or any other PBR, contact us:
e-mail: airperm@tceq.texas.gov
phone: 512/239-1250