Skip to Content
Questions or Comments: airperm@tceq.texas.gov

Air PBR 106.221: Extrusion Presses

Extrusion presses are permitted by rule if they meet the conditions stated in 30 TAC Sections 106.4 and 106.221. No registration or fee is required. Recordkeeping requirements are discussed.

Presses used exclusively for extruding metals, minerals, plastics, rubber, or wood are permitted by rule under Title 30, Texas Administrative Code (30 TAC), Section 106.221 . To qualify for this permit by rule (PBR), your facility must also meet the general conditions stated in 30 TAC Section 106.4 .

To find out whether your facility meets the general conditions stated in Section 106.4, complete our PBR Applicability Checklist, TCEQ Form - 10149.

If your facility cannot comply with these conditions, see Types of New Source Review Authorizations for other options.

Registration

This PBR does not require you to register or pay a fee.

Recordkeeping

Under 30 TAC Section 106.8 , your records must identify the rules under which your facility is operating and demonstrate compliance for a rolling 12-month period. Be sure you keep at least these records:

These records must be kept on site and readily available on request for inspection by the TCEQ or any air pollution control program that has jurisdiction. If you have questions about the type of records you should keep, contact the Air Program in the TCEQ regional office that serves your county.

Questions? We Can Help

If you have questions please contact us.