Air PBR 106.395: Equipment for Mixing Plastic and Rubber (No Solvent)
Facilities used for equipment for mixing plastic and rubber without
solvent must meet the conditions stated in Title 30, Texas
Administrative Code (30 TAC),
Section 106.395, 
to be permitted by rule. To qualify for this
permit by rule (PBR), your facility must also meet the general
conditions stated in 30 TAC
Section 106.4.
To find out whether your facility meets the general conditions stated in Section 106.4, complete our PBR Applicability Checklist, TCEQ Form - 10149.
If your facility cannot comply with these conditions, see Types of New Source Review Authorizations for other options.
Registration
This PBR does not require you to register or pay a fee.Record Keeping
Under 30 TAC
Section 106.8, your records must identify the rules under which
your facility is operating and demonstrate compliance for a rolling
12-month period. Be sure you keep at least these records:
- a copy of
Section 106.4
- a copy of
Section 106.395
- records documenting compliance with the above rules
These records must be kept on site and readily available on
request for inspection by the TCEQ or any air pollution control
program that has jurisdiction. If you have questions about the type
of records you should keep, contact the Air Program in the
TCEQ regional office 
that serves your county.
Questions? We Can Help
If you have questions about this or any other PBR, contact
us:
e-mail: airperm@tceq.texas.gov
phone: 512/239-1250