Skip to main content

San Jacinto-Brazos Coastal Basin Monitor Summary

Use the selection box below to customize this report. You may sort this report by monitoring site or by parameters monitored. Click on the Generate Report button once you have made your selections.
Sort by
Parameter Monitored POC First Valid Data Monitor Status
Dickinson Bayou at SH3 C733  Deactivated: Jul 8, 2009
    Surface Water Temperature 1 Mar 6, 2007 Deactivated Apr 27, 2009
Water Level 1 Mar 6, 2007 Deactivated Apr 27, 2009
Surface Specific Conductance 1 Mar 6, 2007 Deactivated Apr 27, 2009
Surface Dissolved Oxygen 1 Mar 6, 2007 Deactivated Apr 27, 2009
Surface Water pH 1 Mar 6, 2007 Deactivated Apr 27, 2009
Armand Bayou at Bay Area Blvd. C734  Deactivated: Jul 8, 2009
    Surface Water Temperature 1 Mar 7, 2007 Deactivated Apr 27, 2009
Water Level 1 Mar 7, 2007 Deactivated Apr 27, 2009
Surface Specific Conductance 1 Mar 7, 2007 Deactivated Apr 27, 2009
Surface Dissolved Oxygen 1 Mar 7, 2007 Deactivated Apr 27, 2009
Surface Water pH 1 Mar 7, 2007 Deactivated Apr 27, 2009
Clear Creek at Mykawa Rd. C761
    Surface Water Temperature 1 Aug 5, 2007 Deactivated Dec 1, 2009
Water Flow Rate 1 Jul 31, 2007 Deactivated Dec 1, 2009
Gage Height 1 Aug 1, 2007 Deactivated Dec 1, 2009
Surface Specific Conductance 1 Aug 5, 2007 Deactivated Dec 1, 2009

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.