Skip to main content

North Bosque at Hwy 6 Bridge C725

Find Site:       
  • State: Texas
  • County: Erath
  • City: Clairette
  • Address: N. Bosque River at SH 6 bridge
  • Site coordinates:
    • Latitude: 32° 02' 22.00" North (+32.039444°)
    • Longitude: 98° 06' 27.00" West (-98.107500°)
    • Elevation: 323 m (1060 ft)
  • Deactivated (Deactivated Oct 15, 2014)
Area Map Overall site view Street level Map
 Upstream  
Left Bank
Right Bank
 Downstream  
CAMS Data
Historical Measurements
Monthly Summary Report
Yearly Summary Report
  • Real-time monitoring since: Thursday, May 25, 2006
  • Current status: Deactivated Wednesday, October 15, 2014
  • Parameters that have been monitored but are no longer active:
    • Water parameters:
      • Surface Water Temperature
      • Aqualab Nitrate Blank
      • Aqualab Ammonia Blank
      • Aqualab TRP Blank
      • Water Level
      • Surface Specific Conductance
      • Water Ammonia
      • Water Nitrate
      • Turbidity
      • Water Total Reactive Phosphorus
      • Surface Dissolved Oxygen
      • Surface Water pH
      • Aqualab Cabinet Temperature
      • Aqualab Specific Conductance Standard Check
      • Aqualab Specific Conductance Base Check
      • Aqualab DO Standard Check
      • Aqualab pH Standard Check
      • Aqualab Turbidity Check

PLEASE NOTE:  This data has not been verified by the TCEQ and may change. This is the most current data, but it is not official until it has been certified by our technical staff. Data is collected from TCEQ ambient monitoring sites and may include data collected by other outside agencies. This data is updated hourly. All times shown are in local standard time unless otherwise indicated.

Following EPA reporting guidelines, negative values may be displayed in our hourly criteria air quality data, down to the negative of the EPA listed Method Detection Limit (MDL) for the particular instrument that made the measurements. The reported concentrations can be negative due to zero drift in the electronic instrument output, data logger channel, or calibration adjustments to the data. Prior to 1/1/2013, slightly negative values were automatically set to zero.