Skip to Content
Questions or Comments: airperm@tceq.texas.gov

Air PBR 106.281: Feed Milling

Modifications to feed milling facilities are permitted by rule if the modifications meet the conditions stated in 30 TAC Section 106.281 and the facility meets the general conditions in 30 TAC Section 106.4. No registration or fee is required. Recordkeeping requirements are discussed.

Note: The Office of the Secretary of State has moved their content to a new server. Please use this link to access Texas Administrative Code Title 30 until TCEQ is able to update the linked content.

Modifications to feed milling facilities are permitted by rule if the modifications meet the conditions stated in Title 30, Texas Administrative Code (30 TAC), Section 106.281 , and the facility meets the general conditions in 30 TAC Section 106.4 .

To find out whether your facility meets the general conditions stated in Section 106.4, complete our PBR Applicability Checklist, TCEQ Form - 10149.

Quick Screen

Be sure your facility does not exceed the emission limits of 25 tons of particulate matter per year as stated in Section 106.4. If you cannot comply with this limit, see Types of New Source Review Authorizations for other options.

Claiming This PBR

This PBR does not require you to register or pay a fee.

Recordkeeping

Under 30 TAC Section 106.8 , your records must identify the rules under which your facility is operating and demonstrate compliance for a rolling 12-month period. Be sure you keep at least these records:

These records must be kept on site and readily available on request for inspection by the TCEQ or any air pollution control program that has jurisdiction. If you have questions about the type of records you should keep, contact the Air Program in the TCEQ regional office that serves your county.

Questions? We Can Help

If you have questions about this or any other PBR, contact us:
e-mail: airperm@tceq.texas.gov
phone: 512/239-1250